 |
 |
|
|
| HP-002772 CUTTER SHARPENER M6020-A |
 |
|
| |
| ■ Detail |
|
|
|
| |
|
| |
|
Mail technical Parameter |
公制MM |
英制INCH |
| End mill Capacity(Dia of shank×Dia of Edge×Length) |
50×225×250mm |
2"×9"×10" |
| Swing over table |
245mm |
9-3/4" |
| Longitudinal toale travel（X Axis） |
150mm |
6" |
| Cross travel of table（Y Axis） |
75mm |
3" |
| Maximum wheel |
125×50×32mm |
5"×2"×1-1/4" |
| Tilt adjutment for wheelhead |
+35° -10° |
| Air bearing swivel |
360° |
| Air bearing stroke |
250mm |
10" |
| Table infeed graduation |
0.02mm |
0.001 |
| Air bearing graduation |
6.3MPa |
| Pipe joint diameter |
Z1/4" |
| Collet fit for spindle |
5C |
| Parallelism between two tables |
0.01/100mm |
0.01/100 |
| Parallelism of sleeve center line to worktable |
0.01/100 |
| Motor |
Speed |
2800rpm |
3450/2580rpm |
| Voltage |
230V |
110V/1Phase |
| Power |
0.25kw |
1/3HP |
| Frenquecy |
50HZ |
60HZ/50HZ | |
| |
Having opening type structure,adding operation space, enlarging grinding range, this sharpener can grind relief,cutting edge of miller, drill,reamer ,also can grind ball end mill and tap guide cutting edge by changing different attachment
The main part of shappener is made of excerllent Aluminium it has many features such as light weight,resist rot, etc.it takes up advanced international technique of air floating, the spindle rotate flexibly after being pressed, reduce friction to lowest | |
|
|
|
